|Working With Bricks|| ||Saturday, May 20, 2006|
Today is Saturday the 20th. It is time to take a break from the latest project and pound out a journal entry. Right now at 3:00 in the afternoon it is the hottest part of the day and all my shade is gone. I’m hot and grouchy and sick of this project. When these signs surface it is prudent to switch to another job…..
Since arriving home from the last excursion I have been working on the pergola/patio project. I’m getting burned out. Tuesday and Wednesday I cemented the border bricks along the tops of the forms I had poured. I have a fancy edged brick I used for this. Unfortunately, this brick still had cement that had to be chipped off the sides. This was Portland cement which was a real pain to remove. It is so much easier to remove the earlier types of mortars which are composed of just lime, sand and whatever. My arms, wrists and shoulders were aching from swinging that hammer and the shocks from the heavy iron chisel.
To cement these bricks in place on top of the cement form I purchased mortar in 10 pound bags. This stuff sets up real quick. I’m so slow in working with this compound: I don’t want to make a huge batch from the bigger bags and have it harden up before I’m done. After all that chipping cement off the bricks, now I have to mix this mortar crap up by hand. My aching body….at the end of the day nothing feels as good as a HOT shower. It is times like this I say “Screw the gas bills, I need this hot water!”
This project will use up all the remaining bricks from what I had salvaged years ago. I end up being about 120 bricks short. I take the easy way out and actually BUY new bricks from the builders supply. I decided that I will use these new bricks as an outline around the old salvaged brick. That way it will look more uniform. Although the new bricks don’t have the charm or history of the old bricks it sure is a lot easier to just have the bricks loaded into the truck and drive away. No demolition, chipping off mortar or stacking and restacking of the bricks.
I get four bags of sand as a start to set the bricks into their final resting spot in the patio. Once I get started I realize that I have to raise the crushed limestone base over ½ inch to have the bricks level with the border bricks on the form. Back out to Scottie’s for more crushed limestone. This stuff is a fraction of the price of sand.
Laying the bricks level is the worst part of the job. Because I’m using salvaged brick there is no uniform size. Each brick has to leveled as it is put down. The surfaces on these old bricks are not even making the job even more of a pain. Anyone who has read about my projects knows I’m not anal when it comes to this kind of thing. (RIGHT!)
The early morning is the best time for this job. It is so nice and cool, the birds are singing and my coffee is hot. As the day wears on the temperature rises as the sun travels higher in the sky. My shade disappears: by 1:30 I’m working in full sun. I can only do this for so long. After working with the bricks, level, trowel and crushed limestone since 6:30 in the morning it does not take much for an excuse to quit!
That is where I stand at this point in time. I have over half the patio bricks set out and leveled. The worst part is the center design using different street pavers. There are twelve pavers in this center design showing the manufacturer marks. It is almost an even split between
Tonight the neighbors are having a “Sundowner”. Basically it is a get together of the neighborhood with drinks and snacks between five and seven. It is just down the street so I can just walk there.
Hopefully I will have the rest of the bricks leveled by tomorrow afternoon. Then I pour bags of “topping mix” over the whole mess and sweep this mixture between the cracks of the bricks. Mist this all down with the hose and the mix turns into cement which holds everything together.
Then I start on the next project…the new roof for the garage and tool shed addition.